Novoplan 21 is used for levelling and smoothing new or existing substrates and  provides an underlayment for receiving PVC, linoleum, rubber, cork, textile and non-woven flooring in areas where a good resistance to loads and traffic in offices and public areas is required.

Novoplan 21 must only be used in interior conditions in thicknesses from 1 to 5 mm.


Characteristics & Advantages 

*Novoplan 21 is a grey powder comprising of special fast-setting and hydrating  cements, specially graded silica sand, special resins and additives prepared and developed in the MAPEI research laboratories. 

*When mixed with water, Novoplan 21 becomes a very fluid, easily workable mix with excellent self-levelling properties and cures rapidly.

*Novoplan 21 can also be applied with an appropriate pump.

*Novoplan 21 is strong enough to withstand wheelchair traffic.

*Novoplan 21 can be applied in thicknesses up to 5 mm per single coat without  significant shrinkage that might cause cracks or crazing.

*Once completely dry Novoplan 21 has good compressive and flexural strength as well as resistance to impact and abrasion.

*Flooring can be installed once Novoplan 21 has dried, after 24-48 hours, depending on the thickness, temperature and moisture of the environment.
 

Colour

*Grey

Packaging

*25 kg / bag